HYPRO WATER for your baby
Is everything too complicated? We think so too!
We have the uncomplicated solution: The HYPRO WATER guarantees you and your family tap water free of viruses, bacteria, lead, copper and much more. Right out of your tap.
With the HYPRO WATER
you save time
you avoid strenuous lugging of bottles
you avoid expensive baby water
time saving
kein Abkochen
kein Abkühlen
Sicherheit
zertifizierte und patentierte Technologie für erstklassige Wasserqualität
Made in Germany
Cost savings
cheaper than bottled water
Why should you treat tap water?
Normal tap water for babies is not recommended for the preparation of baby food or as a thirst quencher itself. The German Drinking Water Ordinance prescribes the maximum limits for pollutants and minerals, which the waterworks must comply with. However, these maximum values are far too high for a baby!
With the HYPRO WATER, the water can be treated in such a way that your baby can drink the filtered water. Open the tap - and draw germ-free water immediately!
However, our HYPRO WATER does not remove any minerals such as calcium, magnesium, sodium, nitrate and sulfate from the water. Parents should therefore use a drinking water analysis to test whether the sodium, nitrate and sulfate content is low, because babies and small children should only consume these minerals in small doses. You can find more information in our blog post.
- Obsolete house connection pipes
- Inadequate legal regulations
- Pollution from agriculture and industry
There is no mandatory standard for registration in the household sector for UVC LED water treatment devices. We have set ourselves the goal of developing the best water treatment device in the world. The standards we have presented and passed have all been carried out by us voluntarily.
The downstream UVC LED unit switches on automatically at regular intervals and performs self-disinfection. In this way, no germs develop in the device.
The UVC LED unit has passed many long-term tests and has a lifespan of 10,000 hours. They don't need to be replaced. With 20 minutes of use per day, the service life of the LEDs corresponds to 83 years.
The only maintenance effort is the filter change, which has to be done 3 times a year. The exchange is very easy, here you can watch our video about it.
Water from HYPRO WATER has a 300x smaller ecological and CO² footprint than conventional bottled water. You can also read about this in the WHO.
Unlike other water filters, the HYPRO WATER disinfects your drinking water completely chemical-free and without producing waste water/dirty water.
Our production takes place in Germany and we use the highest quality materials. The activated carbon used in the filter is, for example, sustainably obtained from coconut shells.
We offer our customers the option of sending the used filters back to us within Germany. We take care of the professional return to the raw material cycle. You can find more information about our filter recycling concept here.
In our company, we attach great importance to environmental awareness. We are a member of the B.A.U.M. e.V., a network for sustainable management.
You can find more information about sustainability here.
The connection of the HYPRO WATER is very simple and is done by most customers themselves, so we do not have an installation service or field service to assemble the products. However, you can hire any plumbing company or caretaker service
in your area to do the installation, it's child's play.
Our team is available by phone, chat or e-mail for service questions. The product itself has a safety valve. If water leaks out (e.g. due to incorrect installation), the valve is triggered and the water flow is stopped so that there is no water damage in your kitchen.
The HYPRO WATER is a small drinking water plant for your home. With a size of 25x24x16 cm, it can be found in any kitchen.
Most of our customers place the HYPRO WATER under the worktop. With a size comparable to a toaster, it also fits perfectly in drawers directly under the sink.
Thanks to its compact size, the HYPRO WATER can be placed on the worktop. Please note that you will need a small hole for hoses and the power cable.